POR-15, Inc.

POR-15 Concrete Repair Kit – Part A

SECTION 1 : Chemical Product and Company Identification

MSDS Name: POR-15 Concrete Repair Kit – Part A
Manufacturer Name:POR-15, Inc.
Address:
	P.O. Box 1235 Morristown, NJ 07962-1235 Emergency Phone: (973)-887-1999 For information in North America, call: (800) 457-6715 CHEMTREC Numbers: For emergencies outside US, call INTERNATIONAL: (703)527-3887
Email: support@por15.com
Business Phone:(800) 457-6715
Business Fax: (973) 887-8007
Product Description:
	EPOXIDE RESIN COMPOUND
For information in North America, call: (800) 457-6715
For emergencies in the US, call CHEMTREC: 800-424-9300

SECTION 2 : Hazardous Ingredients/Identity Information

Chemical Name
TRADE SECRET: PROPRIETARY FORMULATED EPOXY PREPOLYMER

SECTION 3 : Physical And Chemical Characteristics


Color:
	CLEAR, STRAW COLOR
Odor:
	MILD AROMATIC
Physical State:
	LIQUID
Vapor Density:
	(AIR = 1): Not Applicable
Boiling Point:
	> 149 deg C (> 300 deg F)
Melting Point:
	Not Applicable
Solubility:
	IN WATER: NEGLIGIBLE
Specific Gravity:
	1.10 – 1.15
Percent Volatile:
	BY VOL: < 0.1
FlashPoint:
	> 250 deg F
Auto Ignition Temp:
	Not Applicable
Upper Flammable Explosive Limit:
	Not Applicable
Lower Flammable Explosive Limit:
	Not Applicable

SECTION 4 : Fire And Explosion Hazards


Flash Point:
	> 250 deg F
Upper Flammable or Explosive Limit: Not Applicable
Lower Flammable or Explosive Limit: Not Applicable
Auto Ignition Temperature: Not Applicable
Extinguishing Media:
	CARBON DIOXIDE, DRY CHEMICAL, AND SAND OR LIMESTONE FOR SMALL FIRE.
Fire Fighting Instructions:
	A FACE SHIELD SHOULD BE WORN. FIREFIGHTERS SHOULD WEAR BUTYL RUBBER BOOTS, GLOVES, BODY SUIT AND SELF-CONTAINED BREATHING APPARATUS.
Fire Fighting Equipment:
	NONE

SECTION 5 : Health Hazards


TRADE SECRET: PROPRIETARY FORMULATED EPOXY PREPOLYMER:
Potential Health Effects:
	EFFECT OF OVEREXPOSURE: POSSIBLE NASAL OR LUNG IRRITATION OR CENTRAL NERVOUS SYSTEM DEPRESSION.
Eye Contact:
	MINOR IRRITATION. MINOR TRANSIENT CORNEAL INJURI LIKELY.
Skin Contact:
	MILD IRRITATION. MAY BE A SKIN SENSITIZER.
Skin Absorption:
	NOT LIKELY TO BE ABSORBED IN TOXIC AMOUNTS.
Inhalation:
	NOT LIKELY A PROBLEM AT ROOM TEMPERATURE. VAPORS FROM HEATED MATERIAL MAY BE IRRITATING.
Ingestion:
	LOW SINGLE ORAL TOXICITY: LD50 (RAT): > 2000MG/KG.

SECTION 6 : Emergency And First Aid Procedures


Eye Contact:
	IMMEDIATELY FLUSH EYES WITH WATER FOR AT LEAST 15 MINUTES. REFER TO MEDICAL PERSONNEL.
Skin Contact:
	IMMEDIATELY FLUSH AFFECTED AREA WITH WATER FOR AT LEAST 15 MINUTES. CONTACT WILL PROBABLY CAUSE NO MORE THAN IRRITATION.
Inhalation:
	REMOVE TO FRESH AIR. CONSULT MEDICAL PERSONNEL.
Ingestion:
	LOW IN TOXICITY. INDUCE VOMITING IF LARGE AMOUNTS ARE INGESTED.

SECTION 7 : Reactivity Data


Chemical Stability:
	STABLE UNDER NORMAL CONDITIONS. PROLONGED EXCESSIVE HEAT MAY CAUSE PARTIAL DEGRADATION.
Incompatibilities with Other Materials:
	ACTIVE ACIDS AND BASES.
Hazardous Polymerization:
	WILL NOT OCCUR BY ITSELF, BUT MASSES OF MORE THAN 1-2 POUNDS OF PRODUCT PLUS AN ALIPHATIC AMINE MAY CAUSE IRREVERSIBLE REACTION WITH CONSIDERABLE HEAT BUILDUP.

SECTION 8 : Precautions For Safe Handling


Spill Cleanup Measures:
	ABSORB ONTO SAND OR OTHER ABSORBENT MATERIAL. SHOVEL INTO CLOSEABLE CONTAINER FOR DISPOSAL. RESIDUAL RESIN CAN BE REMOVED BY USE OF NONFLAMMABLE SOLVENT SUCH AS METHYLENE CHLORIDE. FLUSH CONTAMINATED AREA WITH WATER.


Handling:
	NONE EXCEPT NORMAL HANDLING CARE. PRACTICE GOOD CAUTION AND PERSONAL CLEANLINESS TO AVOID EYE AND SKIN CONTACT. AVOID BREATHING VAPORS IF GENERATED.

SECTION 9 : Control Measures


Personal Protective Equipment Routine Handling:
	PRECAUTIONS: AVOID CONTACT WITH EYES, SKIN AND CLOTHING. AVOID BREATHING VAPOR, MIST OR SPRAY. USE ONLY ADEQUATE VENTILATION. PROMPTLY REMOVE WET CONTAMINATED NON-IMPERVIOUS CLOTHING, WASH BEFORE REUSE. DESTROY CONTAMINATED LEATHER AND ABSORBENT SHOES. INDIVIDUALS SHOULD WASH THOROUGHLY AFTER HANDLING.

SECTION 10 : Other Information


MSDS Revision Date:
	07/02/2008
Disclaimer:
	This Health and Safety Information is correct to the best of our knowledge and belief at the date of its publication but we cannot accept liability for any loss, injury or damage which may result from its use. We shall ensure, so far as is reasonably practicable, that any revision of this Data Sheet is sent to all customers to whom we have directly supplied this substance, but must point out that it is the responsibility of any intermediate supplier to ensure that such revision is passed to the ultimate user. The information given in the Data Sheet is designed only as a guidance for safe handling, storage and the use of the substance. It is not a specification nor does it guarantee any specific properties. All chemicals should be handled only by competent personnel, within a controlled environment. Should further information be required, this can be obtained through the sales office whose address is at the top of this data sheet. We welcome any additional information about our products that customers have obtained by personal experience.