POR-15, Inc.

POR-15 Concrete Repair Kit - Part B

SECTION 1 : Chemical Product and Company Identification

MSDS Name: POR-15 Concrete Repair Kit - Part B
Manufacturer Name:POR-15, Inc.
Address:
	P.O. Box 1235 Morristown, NJ 07962-1235 Emergency Phone: (973)-887-1999 For information in North America, call: (800) 457-6715 CHEMTREC Numbers: For emergencies outside US, call INTERNATIONAL: (703)527-3887
Email: support@por15.com
Business Phone:(800) 457-6715
Business Fax: (973) 887-8007
Product Description:
	CLASS: LIQUID EPOXY COREACTANT EPOXIDE RESIN COMPOUND
For information in North America, call: (800) 457-6715
For emergencies in the US, call CHEMTREC: 800-424-9300
Trade Names:
	Concrete Repair Kit Part B

SECTION 2 : Hazardous Ingredients/Identity Information

Chemical Name
TRADE SECRET: PROPRIETARY FORMULATED AMINES

SECTION 3 : Physical And Chemical Characteristics


Color:
	CLEAR, STRAW COLOR
Odor:
	ODOR LIGHT AMMONIA
Physical State:
	LIQUID
Vapor Density:
	(AIR = 1): Not Applicable
Boiling Point:
	> 121 deg C (> 250 deg F)
Melting Point:
	Not Applicable
Solubility:
	IN WATER: MODERATE
Specific Gravity:
	0.95 – 0.97
Percent Volatile:
	BY VOL: 0
FlashPoint:
	> 250 deg F
Auto Ignition Temp:
	Not Applicable
Upper Flammable Explosive Limit:
	Not Applicable
Lower Flammable Explosive Limit:
	Not Applicable

SECTION 4 : Fire And Explosion Hazards


Flash Point:
	> 250 deg F
Upper Flammable or Explosive Limit: Not Applicable
Lower Flammable or Explosive Limit: Not Applicable
Auto Ignition Temperature: Not Applicable
Extinguishing Media:
	CARBON DIOXIDE, DRY CHEMICAL, AND SAND OR LIMESTONE FOR SMALL FIRE.
Fire Fighting Instructions:
	A FACE SHIELD SHOULD BE WORN. FIREFIGHTERS SHOULD WEAR BUTYL RUBBER BOOTS, GLOVES, BODY SUIT AND SELF-CONTAINED BREATHING APPARATUS.
Fire Fighting Equipment:
	NONE

SECTION 5 : Health Hazards


TRADE SECRET: PROPRIETARY FORMULATED AMINES:
Potential Health Effects:
	EFFECT OF OVEREXPOSURE: MAY CAUSE SKIN SENSITIZATION. NONE OTHER KNOWN.
Eye Contact:
	EXTREME IRRITATION
Skin Contact:
	ONLY MINOR IRRITATION. PRIMARY IRRITATION TEST SCORE 1.2.
Skin Absorption:
	PROLONGED OR REPEATED CONTACT MAY CAUSE INJURY.
Inhalation:
	NOT LIKELY A PROBLEM AT ROOM TEMPERATURE. VAPORS FROM HEATED MATERIAL MAY BE IRRITATING.
Ingestion:
	LOW SINGLE ORAL TOXICITY: LD50 (RAT): > 16G/KG.

SECTION 6 : Emergency And First Aid Procedures


Eye Contact:
	IMMEDIATELY FLUSH EYES WITH WATER FOR AT LEAST 15 MINUTES. REFER TO MEDICAL PERSONNEL.
Skin Contact:
	IMMEDIATELY FLUSH AFFECTED AREA WITH WATER FOR AT LEAST 15 MINUTES. CONTACT WILL PROBABLY CAUSE NO MORE THAN IRRITATION.
Inhalation:
	REMOVE TO FRESH AIR. CONSULT MEDICAL PERSONNEL.
Ingestion:
	TOXIC. INDUCE VOMITING IF LARGE AMOUNTS ARE INGESTED.

SECTION 7 : Reactivity Data


Chemical Stability:
	STABLE UNDER NORMAL CONDITIONS. PROLONGED EXCESSIVE HEAT MAY CAUSE PARTIAL DEGRADATION.
Incompatibilities with Other Materials:
	EPOXY RESINS UNDER UNCONTROLLED CONDITIONS.
Hazardous Polymerization:
	NONE
Hazardous Decomposition Products:
	NONE UNDER NORMAL CONDITIONS.

SECTION 8 : Precautions For Safe Handling


Spill Cleanup Measures:
	(USE APPROPRIATE SAFETY EQUIPMENT): SOAK IN ABSORBENT MATERIAL OR SCRAPE UP. SCRUB WITH 5% ACETIC ACID TO EMULSIFY. RINSE WITH VERY HOT WATER.


Handling:
	NONE EXCEPT NORMAL HANDLING CARE. PRACTICE GOOD CAUTION AND PERSONAL CLEANLINESS TO AVOID EYE AND SKIN CONTACT. AVOID BREATHING VAPORS IF GENERATED.


Waste Disposal:
	BURY IN APPROPRIATE LANDFILL. (OPTIONAL) BURN COMBUSTIBLE PORTION IN ADEQUATE INCINERATOR.

SECTION 9 : Control Measures


Ventilation System:
	SUFFICIENT TO MINIMIZE VAPOR EXPOSURE IF GENERATED.
Eye/Face Protection:
	SAFETY GLASSES.
Protective Clothing/Body Protection:
	CLEAN, BODY-COVERING CLOTHING. DISPOSABLE PLASTIC OR RUBBER GLOVES. DISPOSAL CONTAINERS AND PAPER IN WORK AREA.
Respiratory Protection:
	NONE LIKELY NEEDED.

SECTION 10 : Other Information


MSDS Revision Date:
	07/02/2008 This Health and Safety Information is correct to the best of our knowledge and belief at the date of its publication but we cannot accept liability for any loss, injury or damage which may result from its use. We shall ensure, so far as is reasonably practicable, that any revision of this Data Sheet is sent to all customers to whom we have directly supplied this substance, but must point out that it is the responsibility of any intermediate supplier to ensure that such revision is passed to the ultimate user. The information given in the Data Sheet is designed only as a guidance for safe handling, storage and the use of the substance. It is not a specification nor does it guarantee any specific properties. All chemicals should be handled only by competent personnel, within a controlled environment. Should further information be required, this can be obtained through the sales office whose address is at the top of this data sheet. We welcome any additional information about our products that customers have obtained by personal experience.